Konami Pin Out

Discovered on Scramble but this pin out includes pins for other Konami games.

Solder Side Pin Pin Parts Side
-5VDC A1 B1 +12VDC
Speaker A2 B2 Speaker
Bomb (Fire (Player 2)) A3 B3 NOT USED
Left (Player 2)* A4 B4 Right (Player 2)*
Start (Player 1) A5 B5 Start (Player 2)*
NOT USED A6 B6 Up (Player 2)*
Laser (Fire (Player 1)) A7 B7 Service
Right (Player 1) A8 B8 Left (Player 1)
Up (Player 1) A9 B9 Down (Player 2)*
Coin 1 A10 B10 Coin 2
Down (Player 1) A11 B11 Coin Meter 1
NOT USED A12 B12 Coin Meter 2
Video Green A13 B13 Video Blue
Video Red A14 B14 Video Sync
NOT USED A15 B15 NOT USED
Ground (GND) A16 B16 Ground (GND)
Ground (GND) A17 B17 Ground (GND)
+5VDC A18 B18 +5VDC

* not used on Scramble, a single player game

Settings

Scramble

Scramble has on DIP switch bank on the smaller, top logic board. It is located near the edge connector in component column 2. This board is not lettered for rows, but it would be row H. It is the third component up from the column 2 label.

1 2 Rockets 3 Cabinet Type 4 5 Coin per Play 6
ON ON 3 ON Upright ON ON 2 Coins, 1 Play NOT USED
ON OFF 4 OFF Cocktail ON OFF 1 Coin, 1 Play  
OFF ON 5     OFF ON 3 Coins, 1 Play  
OFF OFF Unlimited     OFF OFF 4 Coins, 1 Play  

Volume is located at A2 under the heat sink. Row A is not labeled. The hold in the heat sink canbe your guide.